Difference between revisions of "Electronics and Rapid Prototyping"

From MakeICT Wiki
Jump to navigationJump to search
(→‎ERP SAFETY: Created Storage Policy (Tribble Clause) and Donation Policy (Borg Clause). Minor formatting edits to the rest of the page.)
 
(33 intermediate revisions by 8 users not shown)
Line 1: Line 1:
 
{{needs-update|details=missing details and access policies}}
 
{{needs-update|details=missing details and access policies}}
  
== General Information ==
+
==General Information==
MakeICT's Electronics and Rapid Prototyping lab is an enclosed 200 sq ft area. This area has several dedicated spaces. One is for creation of electronics, including a board milling machine, area dedicated for assembly, and reflow oven. Another is for the troubleshooting of electronics, including a hot air rework station, Spectrum Analyzer, Oscilloscope, current limited power supply, and logic analyzer. We have a pair of CNC machines fully capable of handling wood, and some aluminum. We offer Dremmel sets to handle less delicate work (or more delicate depending on your skill.) We also have systems one can check out for the learning of electronics, toolsets to fix and repair, as well as Chip programmers, a bus pirate, Raspberry Pis, Arduinos, even a pic based USB module. We offer a full components library, resplendent with analogue devices, TTL type logic, some rare chipsets, and a full complement of passives. The hackables library is also located here. Here is where you may find the inspiration and starting point for your next blue ribbon hack. This lab is dedicated to creating and debugging electronics, as well as some rapid prototyping capabilities. Never a room to be bored in, the common complaint in this room is, "what do I make first?"
+
MakeICT's Electronics and Rapid Prototyping lab is an enclosed 708 sq ft area. This area has several dedicated spaces. One is for creation of electronics, including a board milling machine, area dedicated for assembly, and reflow oven. Another is for the troubleshooting of electronics, including a hot air rework station, Spectrum Analyzer, Oscilloscope, current limited power supply, and logic analyzer. We offer Dremmel sets to handle less delicate work (or more delicate depending on your skill.) We also have systems one can check out for the learning of electronics, toolsets to fix and repair, as well as Chip programmers, a bus pirate, Raspberry Pis, Arduinos, even a pic based USB module. We offer a full components library, resplendent with analogue devices, TTL type logic, some rare chipsets, and a full complement of passives. This lab is dedicated to creating and debugging electronics, as well as some rapid prototyping capabilities. Never a room to be bored in, the common complaint in this room is, "what do I make first?"  
  
[[User:James A Seymour|James Seymour]] is the Area Lead over the electronics and rapid prototyping lab.
+
This is the place to start learning about electronics. Need some [[ERP TUTORIALS|2-tor-ialz]]?
  
== Equipment Access Policy ==
+
The [[Area Lead]] over the electronics and rapid prototyping lab is [[User:James A Seymour|James Seymour]]. Frazzled Captain-in-Training and self proclaimed organizing queen is [[User:Kez Cook|Kez Cook]]. 
  
'''THIS POLICY IS NOT YET APPROVED OR OFFICIAL'''
+
==Equipment Access Policy==
  
We prefer a solid understanding of the equipment you are using before use. Certain pieces of equipment are expensive and not easily repaired. Some pieces of equipment can seriously injure or kill you. It never hurts to run what your doing by someone. There are some dangerous pieces of equipment that can burn mutilate or electrocute. These require peer certification, for the user's safety.  SAFE OPERATION of equipment is top priority.
+
'''THIS POLICY IS NOT YET APPROVED OR OFFICIAL and is under construction'''
  
To protect members, any project that exceeds 50V must be clearly labeled "DANGER HIGH VOLTAGE" and will not be left powered up unattended unless wiring is inaccessible to accidental contact. Additionally, the building power panel located on the north wall is considered off limits to members unless they are board appointed personnel. When in doubt, ask.
+
===All Equipment===
  
We strongly suggest that while machining tools are in operation, anyone entering that part of the shop use personal protective equipment (PPE) such as safety glasses, hearing protection, and hand protection.  
+
*Equipment requiring authorization may be operated by an unauthorized user only under the '''direct''' supervision of an authorized user.
  
Finally, is HIGHLY recommended that we use a buddy system, where no single person is working in the shop without a second person in the building so that if there is an injury, somebody else is there to call for help or assist you.
+
===Scopes===
 +
MakeICT has a few Oscilloscopes. Most notably is the [[Tektronix 465B]] We are fortunate to have some nice ones. Using the Oscilloscope takes some finesse and it's best you have some help with it if you're fairly new to one, so we require certification. The Oscilloscope shows Voltage over time, similar to a graph. There are lots of settings, dials, and switches. if you want to learn to use it just ask to be taught from a reasonably knowledgeable member.
 +
 
 +
*List of known Scope users is listed below
 +
**[[User:Tom McGuire|Tom McGuire]]
 +
**[[USer:James A Seymour|James Seymour]]
 +
 
 +
===Spectrum Analyzer===
 +
We have a very nice Spectrum Analyzer ([[Tektronix 492 AP]]). The Spectrum Analyzer shows receive power over frequency. So if you set it properly you would see Peaks where each Wifi network is transmitting. It is easy (and expensive) to damage the input of a Spectrum Analyzer. We ask you are certified and use proper caution. We have several attenuators available for impedance matching, so use them.
 +
 
 +
*List of known analyzer users is listed below
 +
**[[User:James A Seymour|James Seymour]]
 +
 
 +
<br />
 +
===ERP SAFETY===
 +
We prefer a solid understanding of the equipment you are using before use. Certain pieces of equipment are expensive and not easily repaired. Some pieces of equipment can seriously injure or kill you. It never hurts to run what your doing by someone. There are some dangerous pieces of equipment that can burn mutilate or electrocute. These require peer authorization, for the user's safety.  SAFE OPERATION of equipment is top priority.
 +
 
 +
To protect members, any project that exceeds 50V must be clearly labeled "DANGER HIGH VOLTAGE" and will not be left powered up unattended unless wiring is inaccessible to accidental contact.
 +
 
 +
Finally, is HIGHLY recommended that we use a buddy system, where no single person is working in the shop without a second person in the building so that if there is an injury, somebody else is there to call for help or assist you.  
  
 
==Borrowing Items==
 
==Borrowing Items==
Currently we do not lend out equipment, but as we build up an inventory of certain items, we may allow checkout similar to a library. Special arrangements may be made on a individual basis, but that is entirely up to the [[User:James A Seymour|BD]].
+
Currently we do not lend out equipment, but as we build up an inventory of certain items, we may allow checkout similar to a library. Special arrangements may be made on a individual basis, but that is entirely up to the Area Lead.
  
 
==Items for Purchase==
 
==Items for Purchase==
We do have certain items for sale. Sales should be considered final, the money goes back into the ERP Lab.
+
We do not currently have items for purchase.
 
 
==Hackables Policy==
 
Items donated to the space with the intent of being hacked (or reused in a way that it was not originally intended) should be placed on the middle shelf that is labeled "HACKABLES" by the back door. If there is no room on the shelf try rearranging things to make it fit. If that's not possible please take your items home until some space gets cleared out on the shelf. Every two weeks or as needed a message will be posted on the group list that the shelf will be cleared. Any items on the Hackables shelf are up for grabs by any member. If you just need a part out of a hackable you don't have to take the whole thing. Just place the remainder back on the shelf for someone else to hack. But if there's really nothing good left in it please throw it away.Items that are considered to have long term hackable value can be moved to other work areas with permission of the area[[User:James A Seymour|BD]]. For instance circuit boards that have parts on them that are generally good for circuit building projects can be moved to the ERP area hackables shelves.
 
The ERP lab BD maintains the hackables inventory. Hackables are up for grabs and may be removed from the shelves at any time. Any questions about hackables can be refereed to the current [[User:James A Seymour|BD]].
 
  
 
==Component Library==
 
==Component Library==
Line 33: Line 48:
 
Many of our devices come from dubious sources, MakeICT makes no claim as to their datasheet capabilities, and a certain amount of derateing may be required.
 
Many of our devices come from dubious sources, MakeICT makes no claim as to their datasheet capabilities, and a certain amount of derateing may be required.
  
== Classes ==
+
==Classes==
* [[Basic Electronics Workshop]]
+
 
* [[Circuit Design and Fabrication]]
+
*[[Basic Electronics Workshop]]
* [[Rapid Prorotyping with CNC]]
+
*[[Circuit Design and Fabrication]]
* [[Basic Soldering Class]]
+
*[[Rapid Prorotyping with CNC]]
 +
*[[Basic Soldering Class]]
 +
 
 +
==Electronics and Rapid Prototyping Safety==
 +
 
 +
#'''Do not use any machine you are not trained on and comfortable using.''' If at any time you are unsure of what you are doing, stop immediately and ask for help.
 +
#'''Do not use any machine that is not in good working order.''' Stop, unplug and leave a note on the machine and notify the Area Lead.
 +
#'''NEVER ASSUME A TOOL IS PROPERLY ADJUSTED.''' Always check the tool prior to use.
 +
#'''NEVER MODIFY OR HACK MACHINERY WITHOUT CONSENT FROM THE AREA LEAD.'''
 +
#'''Always triple check your inputs when connecting to equipment. Dangerous levels are dangerous.'''
 +
 
 +
<br />
 +
==Overnight Project Storage Policy - The Tribble Clause==
 +
Random, unclaimed projects are like printers and tribbles: [[How to lead the ERP lab|they're bad news]]. Never fear, we have good news: there are clearly marked shelves in the middle of the lab for ''2 week personal project storage.'' For any and all projects left in the ERP overnight, please use the masking tape provided, or whatever you want, to ''clearly'' mark on your project including:
 +
 
 +
 
 +
- Your '''name'''
 +
 
 +
- Your preferred form of '''contact information (phone number/email/forum username)'''
 +
 
 +
- The '''date that you left the project'''.
 +
 
 +
 
 +
Please be cool and make sure that your project is not left longer than 2 weeks.  At 2 weeks, the tribble hating softball fairy will ''poof'' show up and pitch the project (be it printer, tribble, or super cool electromagnet laser project) into the unknown. So far, I have kept the Q Continuum far away from this lab, but there’s only so much little ol’ me can do.
  
=== Scopes ===
 
MakeICT has a few Oscilloscopes. Most notably is the [[Tektronix 465B]] We are fortunate to have some nice ones. Using the Oscilloscope takes some finesse and it's best you have some help with it if you're fairly new to one, so we require certification. The Oscilloscope shows Voltage over time, similar to a graph. There is lots of settings, dials, and switches. if you want to learn to use it just ask to be taught from a reasonably knowledgeable member.
 
* List of known Scope users is listed below
 
**[[User:Tom McGuire|Tom McGuire]]
 
**[[USer:James A Seymour|James Seymour]]
 
  
=== Spectrum Analyzer ===
+
Note: If the project does not fit in the provided shelves, it is too large to store in the lab without explicit prior permission from an ERP Area/Assistant [[Contact Information|Lead]].
We have a very nice Spectrum Analyzer ([[Tektronix 492 AP]]). The Spectrum Analyzer shows receive power over frequency. So if you set it properly you would see Peaks where each Wifi network is transmitting. It is easy (and expensive) to damage the input of a Spectrum Analyzer. We ask you are certified and use proper caution. We have several attenuators available for impedance matching, so use them.
 
* List of known analyzer users is listed below
 
**[[User:James A Seymour|James Seymour]]
 
  
=== Circuit Design and Fabrication ===
+
<br />
Use of the [[Board Goblin-Circuit Board Mill]] and or [[SMD Circuit Work Station]] requires attendance in the [[Circuit Design and Fabrication]] or certification from an approved peer-certifier. We do not mind if your circuit doesn't work, we do mind if our equipment doesn't.
 
* Any member who has been certified to use the circuit fabrication equipment may peer-certify other members
 
* Certification instruction must at least include
 
** Fundamental knowledge of circuit board milling principles
 
** Fundamental knowledge of soldering and solder reflow
 
** Proper use and control of the LinuxCNC software
 
** Basic circuit design
 
* Certification must be documented (''link to instructions or form'') prior to use
 
* List of circuit fabrication users below
 
**[[User:Tom McGuire|Tom McGuire]]
 
  
=== V90 CNC router ===
+
==Donation Policy - The Borg Clause ==
Use of the [[V90]] CNC router requires attendance in [[CNC Router certification workshop]]
+
If you're just itching to donate a super cool set of sonic screw drivers, that's cool. Just ask us first. Maybe we already have a set and would encourage you to find a less fortunate home for them. Or maybe we would accept them with a huge grin and cheer of thanks. Just ask us first.
* Certification must be documented (''link to instructions or form'') prior to use
 
* List of CNC Router Certified users is listed below
 
**[[User:Tom McGuire|Tom McGuire]]
 
  
=== 'The Beast' RD-500S II rework Machine ===
+
That said, any random equipment/project/junk that is left in the ERP, without prior conversation with an ERP Area/Assistant [[Contact Information|Lead]], will be assimilated into the ERP. Assimilation may take many forms, be it Borg, or Q, or Who (aka, the Area Leads will determine it's fate). If that is not what you wish for your most prized donation, do not leave random stuff in the lab.
The Beast isn't up and running yet. It requres some TLC and is considered a work in progress. Once operational, it is designed to make short work of SMD replacement, by combining a CNC rework station with an on board reflow process. Operation will be mostly peer Certification.
 
  
==Electronics and Rapid Prototyping Safety==
+
<br />
# '''Do not use any machine you are not trained on and comfortable using.''' If at any time you are unsure of what you are doing, stop immediately and ask for help.
 
# '''Do not use any machine that is not in good working order.''' Stop, unplug and leave a note on the machine and notify the  BD OR Tom McGuire.
 
# '''NEVER ASSUME A TOOL IS PROPERLY ADJUSTED.''' Always check the tool prior to use.
 
# '''NEVER MODIFY OR HACK MACHINERY WITHOUT CONSENT FROM THE AREA BD.'''
 
# '''Always triple check your inputs when connecting to equipment. Dangerous levels are dangerous.'''
 
  
== Equipment List ==
+
==Equipment List==
 
<onlyinclude>
 
<onlyinclude>
{| class="wikitable sortable" ! data-sort-type="Tool"|
+
{| class="wikitable sortable" data-sort-type="Tool" ! |
 
|-
 
|-
! Picture !! What !! Manufacturer !! Model !! Power !! Status !! Expert
+
!Picture!!What!!Manufacturer!!Model!!Power!!Status!!Expert
 
|-
 
|-
| [[File:Soldering Iron.jpg|200px]] || [[media:Soldering Tips.pdf|Soldering iron]] ||Various || Various || 110 || Working || [[User:James A Seymour|James Seymour]]
+
|[[File:Soldering Iron.jpg|200px]]||[[Media:Soldering Tips.pdf|Soldering iron]]||Various||Various||110||Working||[[User:James A Seymour|James Seymour]]
 
|-
 
|-
| [[File:RD500 II photo.jpg|200px]] || Rework System ||Den-on Instruments || [[media:RD-500 II rework station manual.pdf|RD-500S II]] || 110 || Not yet || [[User:James A Seymour|James Seymour]]
+
|[[File:TEK1240.jpg|200px]]||[[Logic Analyzer]]||Tektronix||1240||110||Working||[[User:James A Seymour|James Seymour]]
 
|-
 
|-
| [[File:TEK1240.jpg|200px]] || [[media:RD-500 II rework station manual.pdf|Logic Analyzer]] ||Tektronix || 1240|| 110 || Working || [[User:James A Seymour|James Seymour]]
+
|[[File:TEK492P.jpg|200px]]||[[Tektronix 492 AP|Oscilliscope]]||Tektronix||492P||110||Working||[[User:James A Seymour|James Seymour]]
 
|-
 
|-
| [[File:TEK492P.jpg|200px]] || [[Tektronix 492 AP|Oscilliscope]] ||Tektronix || 492P || 110 || Working || [[User:James A Seymour|James Seymour]]
+
|[[File:TEK465B.jpg|200px]]||[[Tektronix 465B|Oscilloscope]]||Tektronix||465B||110||Working||[[User:James A Seymour|James Seymour]]
 
|-
 
|-
| [[File:TEK465B.jpg|200px]] || [[Tektronix 465B|Oscilloscope]] ||Tektronix|| 465B|| 110 || Working || [[User:James A Seymour|James Seymour]]
+
|[[File:Fluke_867.jpg|200px]]||[[Media:Fluke867 manual.pdf|Graphical Multimeter]]||Fluke||867||9V||Working||[[User:James A Seymour|James Seymour]]
 
|-
 
|-
| [[File:Fluke_867.jpg|200px]] || [[media:Fluke867_manual.pdf|Graphical Multimeter]] ||Fluke|| 867|| 9V || Working || [[User:James A Seymour|James Seymour]]
+
|[[File:Fluke_117.jpg|200px]]||[[Media:Fluke117 manual.pdf|True RMS Non-contact Multimeter]]||Fluke||117||9V||Working||[[User:James A Seymour|James Seymour]]
 
|-
 
|-
| [[File:Fluke_117.jpg|200px]] || [[media:Fluke117_manual.pdf|True RMS Non-contact Multimeter]] ||Fluke|| 117|| 9V || Working || [[User:James A Seymour|James Seymour]]
+
|[[File:Fluke_80K-40.jpg|200px]]||[[Media:Fluke 80K-40 manual.pdf|High Voltage Probe]]||Fluke||80K-40||NA||Working||[[User:James A Seymour|James Seymour]]
 
|-
 
|-
| [[File:Fluke_80K-40.jpg|200px]] || [[media:Fluke_80K-40_manual.pdf|High Voltage Probe]] ||Fluke|| 80K-40|| NA || Working || [[User:James A Seymour|James Seymour]]
+
|[[File:Fluke_80i-1010.jpg|200px]]|| [ |Clamp on DC/AC Current Probe]]||Fluke||80i-1010||1-1000 Adc, 1-600Aac (1 mV/A)||Working||[[User:James A Seymour|James Seymour]]
 
|-
 
|-
| [[File:Fluke_80i-1010.jpg|200px]] || [|Clamp on DC/AC Current Probe]] ||Fluke|| 80i-1010|| 1-1000 Adc, 1-600Aac (1 mV/A) || Working || [[User:James A Seymour|James Seymour]]
+
|[[File:QS-5100.jpg|200px]]||[[Qinsi QS-5100 IR reflow oven|Lead Free Reflow Oven]]||Qinsi Technology||QS-5100||110||Working||[[User:James A Seymour|James Seymour]]
 
|-
 
|-
| [[File:QS-5100.jpg|200px]] || [[Qinsi QS-5100 IR reflow oven|Lead Free Reflow Oven]] ||Qinsi Technology || QS-5100|| 110 || Working || [[User:James A Seymour|James Seymour]]
+
|[[File:arksen992D.jpg|200px]]||[[Media:RD-500 II rework station manual.pdf|Soldering Station with Heat Gun]]||Arksen||992D||110||Working||[[User:James A Seymour|James Seymour]]
 
|-
 
|-
| [[File:arksen992D.jpg|200px]] || [[media:RD-500 II rework station manual.pdf|Soldering Station with Heat Gun]] ||Arksen || 992D|| 110 || Working || [[User:James A Seymour|James Seymour]]
+
|[[File:Board Goblin.jpg|200px]]||[[Board Goblin-Circuit Board Mill]]||[[User:Tom McGuire|Tom McGuire]]||47158||110||Working||[[User:Tom McGuire|Tom McGuire]]
 
|-
 
|-
| [[File:Board Goblin.jpg|200px]] || [[Board Goblin-Circuit Board Mill]] || [[User:Tom McGuire|Tom McGuire]] || 47158|| 110 || Working || [[User:Tom McGuire|Tom McGuire]]
+
|[[File:Fireball_v90.jpg|200px]]||CNC Mill||Probotix||[[V90|Fireball V90]]||110||Not Working||[[User:Tom McGuire|Tom McGuire]]
 
|-
 
|-
| [[File:Fireball_v90.jpg|200px]] || CNC Mill || Probotix || [[V90|Fireball V90]] || 110 || Working || [[User:Tom McGuire|Tom McGuire]]
+
|[[File:Sherline 5400 Mill.jpg|200px]]||CNC Mill||Sherline||[[Sherline CNC Mill]]||110||Working||[[User:James Lancaster|James Lancaster]] [[User:Christian Kindel|Christian Kindel]]
 
|-
 
|-
| [[File:Sherline 5400 Mill.jpg|200px]] || CNC Mill || Sherline || [[Sherline CNC Mill]] || 110 || Working || [[User:James Lancaster|James Lancaster]] [[User:Christian Kindel|Christian Kindel]]  
+
|[[File:CSI Speco PSV5.jpg|200px]]||Variable power supply||SPECO||[[SPECO PSV-5|PSV-5]]||110||Under Repair [[SPECO PSV-5 repair log]]||[[User:James A Seymour|James Seymour]]
 
|-
 
|-
| [[File:CSI Speco PSV5.jpg|200px]] || Variable power supply || SPECO || [[SPECO PSV-5|PSV-5]] || 110 || Under Repair [[SPECO PSV-5 repair log]] || [[User:James A Seymour|James Seymour]]
 
 
|-
 
|-
| [[File:EICO_377.jpg|200px]] || Audio Waveform Generator || EICO || [[377]] || 110 || Not Working || [[User:James A Seymour|James Seymour]]
+
|[[File:UDB100X.jpg|200px]]||5Mhz Tone Generator||MingHe||UDB1005S||110||In-Work||[[User:Mike Barushok|Mike Barushok]]
 
|-
 
|-
| [[File:UDB100X.jpg|200px]] || 5Mhz Tone Generator || MingHe || [[UDB1005S]] || 110 || In-Work || [[User:Mike Barushok|Mike Barushok]]
+
|[[File:DOA-P701-AA.jpg|200px]]||[[Media:Gast DOA Manual.pdf|Vacuum Pump]]||Gast||DOA-P701-AA||110||Working||[[User:James A Seymour|James Seymour]]
 
|-
 
|-
 
|}
 
|}
 
</onlyinclude>
 
</onlyinclude>
 +
 
*Policies may change with the needs of the department and may go into affect before this page is updated to reflect it.
 
*Policies may change with the needs of the department and may go into affect before this page is updated to reflect it.
 +
 +
[[Category:Areas]]

Latest revision as of 21:23, 10 July 2023

Attention! This page or section is out of date. Help us out by modifying this page.
Details: missing details and access policies


General Information

MakeICT's Electronics and Rapid Prototyping lab is an enclosed 708 sq ft area. This area has several dedicated spaces. One is for creation of electronics, including a board milling machine, area dedicated for assembly, and reflow oven. Another is for the troubleshooting of electronics, including a hot air rework station, Spectrum Analyzer, Oscilloscope, current limited power supply, and logic analyzer. We offer Dremmel sets to handle less delicate work (or more delicate depending on your skill.) We also have systems one can check out for the learning of electronics, toolsets to fix and repair, as well as Chip programmers, a bus pirate, Raspberry Pis, Arduinos, even a pic based USB module. We offer a full components library, resplendent with analogue devices, TTL type logic, some rare chipsets, and a full complement of passives. This lab is dedicated to creating and debugging electronics, as well as some rapid prototyping capabilities. Never a room to be bored in, the common complaint in this room is, "what do I make first?"

This is the place to start learning about electronics. Need some 2-tor-ialz?

The Area Lead over the electronics and rapid prototyping lab is James Seymour. Frazzled Captain-in-Training and self proclaimed organizing queen is Kez Cook.

Equipment Access Policy

THIS POLICY IS NOT YET APPROVED OR OFFICIAL and is under construction

All Equipment

  • Equipment requiring authorization may be operated by an unauthorized user only under the direct supervision of an authorized user.

Scopes

MakeICT has a few Oscilloscopes. Most notably is the Tektronix 465B We are fortunate to have some nice ones. Using the Oscilloscope takes some finesse and it's best you have some help with it if you're fairly new to one, so we require certification. The Oscilloscope shows Voltage over time, similar to a graph. There are lots of settings, dials, and switches. if you want to learn to use it just ask to be taught from a reasonably knowledgeable member.

Spectrum Analyzer

We have a very nice Spectrum Analyzer (Tektronix 492 AP). The Spectrum Analyzer shows receive power over frequency. So if you set it properly you would see Peaks where each Wifi network is transmitting. It is easy (and expensive) to damage the input of a Spectrum Analyzer. We ask you are certified and use proper caution. We have several attenuators available for impedance matching, so use them.


ERP SAFETY

We prefer a solid understanding of the equipment you are using before use. Certain pieces of equipment are expensive and not easily repaired. Some pieces of equipment can seriously injure or kill you. It never hurts to run what your doing by someone. There are some dangerous pieces of equipment that can burn mutilate or electrocute. These require peer authorization, for the user's safety. SAFE OPERATION of equipment is top priority.

To protect members, any project that exceeds 50V must be clearly labeled "DANGER HIGH VOLTAGE" and will not be left powered up unattended unless wiring is inaccessible to accidental contact.

Finally, is HIGHLY recommended that we use a buddy system, where no single person is working in the shop without a second person in the building so that if there is an injury, somebody else is there to call for help or assist you.

Borrowing Items

Currently we do not lend out equipment, but as we build up an inventory of certain items, we may allow checkout similar to a library. Special arrangements may be made on a individual basis, but that is entirely up to the Area Lead.

Items for Purchase

We do not currently have items for purchase.

Component Library

MakeICT maintains an electronics library. There is currently an inventory of available active components. This inventory is maintained by volunteers, we ask that you record components you are removing or adding on the clipboard, so that they can be included/subtracted from the inventory. Inventory management is to help the membership, and must rely on the membership. Components in the library are for member use, We only ask you put a buck or two in the donation bucket if you use a lot of them, or some of the rare/complex parts.

Many of our devices come from dubious sources, MakeICT makes no claim as to their datasheet capabilities, and a certain amount of derateing may be required.

Classes

Electronics and Rapid Prototyping Safety

  1. Do not use any machine you are not trained on and comfortable using. If at any time you are unsure of what you are doing, stop immediately and ask for help.
  2. Do not use any machine that is not in good working order. Stop, unplug and leave a note on the machine and notify the Area Lead.
  3. NEVER ASSUME A TOOL IS PROPERLY ADJUSTED. Always check the tool prior to use.
  4. NEVER MODIFY OR HACK MACHINERY WITHOUT CONSENT FROM THE AREA LEAD.
  5. Always triple check your inputs when connecting to equipment. Dangerous levels are dangerous.


Overnight Project Storage Policy - The Tribble Clause

Random, unclaimed projects are like printers and tribbles: they're bad news. Never fear, we have good news: there are clearly marked shelves in the middle of the lab for 2 week personal project storage. For any and all projects left in the ERP overnight, please use the masking tape provided, or whatever you want, to clearly mark on your project including:


- Your name

- Your preferred form of contact information (phone number/email/forum username)

- The date that you left the project.


Please be cool and make sure that your project is not left longer than 2 weeks.  At 2 weeks, the tribble hating softball fairy will poof show up and pitch the project (be it printer, tribble, or super cool electromagnet laser project) into the unknown. So far, I have kept the Q Continuum far away from this lab, but there’s only so much little ol’ me can do.


Note: If the project does not fit in the provided shelves, it is too large to store in the lab without explicit prior permission from an ERP Area/Assistant Lead.


Donation Policy - The Borg Clause

If you're just itching to donate a super cool set of sonic screw drivers, that's cool. Just ask us first. Maybe we already have a set and would encourage you to find a less fortunate home for them. Or maybe we would accept them with a huge grin and cheer of thanks. Just ask us first.

That said, any random equipment/project/junk that is left in the ERP, without prior conversation with an ERP Area/Assistant Lead, will be assimilated into the ERP. Assimilation may take many forms, be it Borg, or Q, or Who (aka, the Area Leads will determine it's fate). If that is not what you wish for your most prized donation, do not leave random stuff in the lab.


Equipment List

Picture What Manufacturer Model Power Status Expert
Soldering Iron.jpg Soldering iron Various Various 110 Working James Seymour
TEK1240.jpg Logic Analyzer Tektronix 1240 110 Working James Seymour
TEK492P.jpg Oscilliscope Tektronix 492P 110 Working James Seymour
TEK465B.jpg Oscilloscope Tektronix 465B 110 Working James Seymour
Fluke 867.jpg Graphical Multimeter Fluke 867 9V Working James Seymour
Fluke 117.jpg True RMS Non-contact Multimeter Fluke 117 9V Working James Seymour
Fluke 80K-40.jpg High Voltage Probe Fluke 80K-40 NA Working James Seymour
Fluke 80i-1010.jpg Clamp on DC/AC Current Probe]] Fluke 80i-1010 1-1000 Adc, 1-600Aac (1 mV/A) Working James Seymour
QS-5100.jpg Lead Free Reflow Oven Qinsi Technology QS-5100 110 Working James Seymour
Arksen992D.jpg Soldering Station with Heat Gun Arksen 992D 110 Working James Seymour
Board Goblin.jpg Board Goblin-Circuit Board Mill Tom McGuire 47158 110 Working Tom McGuire
Fireball v90.jpg CNC Mill Probotix Fireball V90 110 Not Working Tom McGuire
Sherline 5400 Mill.jpg CNC Mill Sherline Sherline CNC Mill 110 Working James Lancaster Christian Kindel
CSI Speco PSV5.jpg Variable power supply SPECO PSV-5 110 Under Repair SPECO PSV-5 repair log James Seymour
UDB100X.jpg 5Mhz Tone Generator MingHe UDB1005S 110 In-Work Mike Barushok
DOA-P701-AA.jpg Vacuum Pump Gast DOA-P701-AA 110 Working James Seymour


  • Policies may change with the needs of the department and may go into affect before this page is updated to reflect it.