Difference between revisions of "Graphtec FC2200-90/EX"

From MakeICT Wiki
Jump to navigationJump to search
Line 28: Line 28:
 
*Speed:10
 
*Speed:10
 
*Quality:1
 
*Quality:1
 +
 +
==Tips==
 +
*After saving the PLT file open it up in Inkscape to verify the output looks right. If there are issues, go back to the source file and save it as a PDF. Open the PDF in Inkscape and then save as PLT. This has fixed all of the conversion issues we have run into so far.
  
 
==Test Files==
 
==Test Files==
 
*[https://drive.google.com/open?id=15_FEPuQvpRuOy_wG0z43D3wh7xqOZnh1 Test Files Drive Folder]
 
*[https://drive.google.com/open?id=15_FEPuQvpRuOy_wG0z43D3wh7xqOZnh1 Test Files Drive Folder]
 
*[https://docs.google.com/presentation/d/17QpdqChdCzYvCMbTnM13wBxACZXlW0Zi7po2hpxJg6g/edit?usp=sharing Vinyl Cutting Basics Slides]
 
*[https://docs.google.com/presentation/d/17QpdqChdCzYvCMbTnM13wBxACZXlW0Zi7po2hpxJg6g/edit?usp=sharing Vinyl Cutting Basics Slides]

Revision as of 11:07, 8 August 2018

This is a flatbed vinyl cutter and plotter. It works.

Graphtec fc2200.gif

Workflow

  • Create/import a file in Inkscape
  • Select all
  • Path > Object To Path
  • File > Save A Copy> choose .plt extension
    • Must have Uniconverter installed
      • Uniconverter is installed on the Thinkstation in the Fab Lab and on a number of the laptops


  • On the computer, put the file into the CUT_NOW folder on the desktop.
    • Username and password are both 'maker'
  • Once there double-click the 'Run Vinyl Cutter' shortcut.
    • It will choose the first file in the folder, so make sure yours is the only one
      • Cut will not start if the machine is in 'view' or 'test' mode.
    • Once done it will be moved to the CUT_DONE folder with the same name.
      • It WILL overwrite files with the same name.

Settings

Small Blade (Blue Knob)

Cutter Offset: 17

Starting point for vinyl:

  • Stickout: 0.2mm
  • Force:18
  • Speed:10
  • Quality:1

Tips

  • After saving the PLT file open it up in Inkscape to verify the output looks right. If there are issues, go back to the source file and save it as a PDF. Open the PDF in Inkscape and then save as PLT. This has fixed all of the conversion issues we have run into so far.

Test Files