Difference between revisions of "Logo and branding"

From MakeICT Wiki
Jump to navigationJump to search
Line 73: Line 73:
 
Logo-primary.svg|Primary SVG
 
Logo-primary.svg|Primary SVG
 
Logo-primary.eps|Primary EPS
 
Logo-primary.eps|Primary EPS
 +
Logo-primary.png|Primary PNG
 
</gallery><gallery>
 
</gallery><gallery>
 
Logo-secondary.svg|Secondary SVG
 
Logo-secondary.svg|Secondary SVG

Revision as of 14:45, 25 June 2017

MakeICT-wallpaper-light.png

Signature Elements and Lock-Ups

The MakeICT signature is a lock-up of 2 elements: the Logo and the Logotype

Lockup-vertical.png

This combination of elements is referred to as a lock-up, as it locks these elements together, in a prescribed scale and relationship to each other that prevents the independent altering of elements.

The primary signature is a centered vertical lock-up. There is a secondary horizontal lock-up of the signature that can be used when limited space requires it, and it is included in the logo files.

Lockup-horizontal.png

Safe Zone

Each lock-up of the signature should have a safe zone around it, ensuring clear space between the mark and other graphic elements. With very rare exceptions, this safe zone should be observed so your identity stands out.

Note: Safe zones are built into the provided files. In the vector files, you will see a guide delineating this area when opened with Adobe Illustrator.

Safe-zones.png

Color

The MakeICT visual identity uses three colors, specified below.

Logo-primary.svg
Pantone Cool Gray 7 (coated)
#97999b
R=151 G=153 B=155
Pantone Cool Gray 11 (coated)
#53565a
R=83 G=86 B=90
Pantone Warm Red (coated)
#ff4438
R=255 G=68 B=56


3-color works best on white backgrounds, for print and web use. For situations where a white background isn’t possible or desired, as is the case with shirts, the logo in 1-color is a good option.

One-color-logo-examples.png

Type

Callout-logotype.png

The MakeICT logotype is set in modified Vitesse Sans, making it custom and unique to MakeICT. Never try to reset, rebuild or approximate the logotype for this reason.

With rare exception, the logotype should always appear with the logo as prescribed in the lock-ups — this is the most memorable and unique form of your identity, when it includes the robot head and maker objects. But in the event that space limitations or other extreme circumstances leave you without a choice, the MakeICT logotype could be used as a standalone mark. It is included in the logo files provided, so there is no need to alter or pull from the primary and secondary logo files.

MakeICT-Logotype.svg

Unacceptable usage

It is highly important for maintaining a successful brand that the MakeICT logo and its signatures be handled and displayed properly and consistently.

The following examples illustrate unacceptable uses.

Unacceptable-logo.png

Acceptable usage

Always:

  • Scale the entire logo uniformly.
  • Use the logo in an unaltered state, as it was furnished in the files.
  • Observe the safe zone.
  • Make sure the background has proper contrast with the logo.


The exception to the rules:

With all these rules, how are you supposed to have any fun?! Well, it’s worth pointing out that these rules are just for official MakeICT branded materials that appear in print and web, signage, etc., where it is important for the logo to be on display in a clear and consistent manner. Following the rules strengthens your brand recognition. But that doesn’t mean your members can’t have fun with it, and you can’t break the rules yourself in special circumstances. Is it an outline if you make it out of wire or neon lights? Or is it a forbidden special effect to route the logo out of a giant slab of wood or cut it out of foam or print it in 3D? That’s a stretch, to police the logo’s use in all situations, so don’t take it too far. Use your best judgment.

Downloads