Difference between revisions of "Prusa i3 MK3"

From MakeICT Wiki
Jump to navigationJump to search
(Created page with "{{3D-Printer-Page |printerName = Prusa i3 MK3 |image = |imageCaption = Stock image of Creality CR-10s |buildVolume = 250 x 210 x 200 mm |filamentTypes = PLA, ABS |filamentSi...")
 
 
(12 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
{{3D-Printer-Page
 
{{3D-Printer-Page
|printerName = Prusa i3 MK3
+
|printerName = Prusa i3 MK3s+
|image =  
+
|image = prusa_stock_image.png
|imageCaption = Stock image of Creality CR-10s
+
|imageCaption = Stock image of Prusa i3 MK3
 
|buildVolume =  250 x 210 x 200 mm
 
|buildVolume =  250 x 210 x 200 mm
 
|filamentTypes = PLA, ABS
 
|filamentTypes = PLA, ABS
Line 12: Line 12:
 
|heatedBed = Yes
 
|heatedBed = Yes
 
|bedTemperature = 100
 
|bedTemperature = 100
|manual =  
+
|manual = https://manual.prusa3d.com/c/Original_Prusa_i3_MK3_kit_assembly
|website =  
+
|website = https://www.prusa3d.com/original-prusa-i3-mk3/
|websiteText =  
+
|websiteText = Prusa i3 MK3 Store Page
  
|features = This printer has the largest build volume of all the printers at MakeICT.
+
|features = These printers have a number of advanced features that make them easier to use:
 +
*Filament sensor to detect material depletion
 +
*Automatic bed leveling
 +
*Head crash detection
  
 
|accessPolicy = See [[3D_Printing#Machine_Access_Policy]] for access policy.
 
|accessPolicy = See [[3D_Printing#Machine_Access_Policy]] for access policy.
  
|use = See [[3D Printing#Workflow]] for workflow information.
+
|use = See [[3D Printing#Workflow]] for general workflow information.
  
|acquisition = This printer was purchased using funds donated by members during a special fundraising effort.
+
'''''DO NOT SPRAY BED WITH HAIRSPRAY!'''''
 +
 
 +
=== Before Printing ===
 +
In order for prints to adhere properly the bed must be clean. Wipe it down with isopropyl alcohol (NOT acetone!) before a print to ensure that the bed is free of oils and dust. There are some special cases for bed preparation depending on the material used. '''Certain materials can damage the bed surface if not used properly'''. Check this chart for more info: https://help.prusa3d.com/en/materials . This will show you which bed is best for the material that you are using. Always check that the correct bed type is selected on the LCD menu before starting your print. Using the wrong setting can damage the bed or prevent proper adhesion.
 +
 
 +
See this link for more information on bed preparation: https://help.prusa3d.com/article/6Gtws6Yqjg-pei-print-surface-preparation
 +
 
 +
=== Filament Change ===
 +
*Press the click wheel once for menu
 +
*Select preheat and choose the appropriate material
 +
*Once heated, press the click wheel for menu
 +
*Scroll down and choose 'Unload Filament'
 +
*Remove filament immediately
 +
*Insert new material and it should automatically load
 +
** If it doesn't load automatically, select 'Autoload Filament' or 'Load Filament' from the menu and follow prompts
 +
 
 +
=== Print Removal ===
 +
'''''DO NOT USE SCRAPERS!'''''
 +
 
 +
Lift the spring steel sheet off of the bed by the front corners. Gently flex the bed in both directions until the print loosens enough to be removed.
 +
 
 +
|acquisition = This printer was purchased using a combination of membership dues and targeted donations. Thanks to everyone who donated!
 
}}
 
}}
 +
[[Category:Equipment]]

Latest revision as of 10:44, 5 June 2022

Prusa i3 MK3s+
noframe
Stock image of Prusa i3 MK3
Technical Specifications
Build Volume 250 x 210 x 200 mm
Filament Types PLA, ABS
Filament Sizes 1.75mm
X/Y Resolution 0.01 mm
Z Resolution ~0.01 mm
Nozzle Diameter 0.4 mm
Max Nozzle Temperature 300° C
Heated Bed Yes
Max Bed Temperature 100° C
Additional Information
User Manual https://manual.prusa3d.com/c/Original_Prusa_i3_MK3_kit_assembly
Website Prusa i3 MK3 Store Page

Features

These printers have a number of advanced features that make them easier to use:

  • Filament sensor to detect material depletion
  • Automatic bed leveling
  • Head crash detection

Access Policy

See 3D_Printing#Machine_Access_Policy for access policy.

Use

See 3D Printing#Workflow for general workflow information.

DO NOT SPRAY BED WITH HAIRSPRAY!

Before Printing

In order for prints to adhere properly the bed must be clean. Wipe it down with isopropyl alcohol (NOT acetone!) before a print to ensure that the bed is free of oils and dust. There are some special cases for bed preparation depending on the material used. Certain materials can damage the bed surface if not used properly. Check this chart for more info: https://help.prusa3d.com/en/materials . This will show you which bed is best for the material that you are using. Always check that the correct bed type is selected on the LCD menu before starting your print. Using the wrong setting can damage the bed or prevent proper adhesion.

See this link for more information on bed preparation: https://help.prusa3d.com/article/6Gtws6Yqjg-pei-print-surface-preparation

Filament Change

  • Press the click wheel once for menu
  • Select preheat and choose the appropriate material
  • Once heated, press the click wheel for menu
  • Scroll down and choose 'Unload Filament'
  • Remove filament immediately
  • Insert new material and it should automatically load
    • If it doesn't load automatically, select 'Autoload Filament' or 'Load Filament' from the menu and follow prompts

Print Removal

DO NOT USE SCRAPERS!

Lift the spring steel sheet off of the bed by the front corners. Gently flex the bed in both directions until the print loosens enough to be removed.

Acquisition

This printer was purchased using a combination of membership dues and targeted donations. Thanks to everyone who donated!