Difference between revisions of "RepRap Prusa Mendel"

From MakeICT Wiki
Jump to navigationJump to search
m
Line 17: Line 17:
  
 
|features = This printer is the best to use for flexible filaments (such as ninjaflex) due to having the extruder mounted directly to the nozzle.
 
|features = This printer is the best to use for flexible filaments (such as ninjaflex) due to having the extruder mounted directly to the nozzle.
 +
 +
|accessPolicy = See [[3D Printing]] for access policy.
  
 
|use = This printer is controlled through the software Pronterface running on the attached computer.
 
|use = This printer is controlled through the software Pronterface running on the attached computer.

Revision as of 10:46, 3 April 2016

RepRap Prusa Mendel
noframe
{{{imageCaption}}}
Technical Specifications
Build Volume 180 x 180 x 100ish mm
Filament Types PLA
Filament Sizes 1.75mm
X/Y Resolution 0.125 mm
Z Resolution .0039 mm
Nozzle Diameter 0.35 mm
Max Nozzle Temperature ???° C
Heated Bed No
Max Bed Temperature N/A° C
Additional Information
User Manual Reprap Prusa Mendel Build Manual MASTER V2 Reduced.pdf
Website RepRap Website

Features

This printer is the best to use for flexible filaments (such as ninjaflex) due to having the extruder mounted directly to the nozzle.

Access Policy

See 3D Printing for access policy.

Use

This printer is controlled through the software Pronterface running on the attached computer.

This printer is a bit more challenging to use than the others. If you have not been instructed on use, please see one of the people who have (Please see Dominic, Tom, Christian, or James L, or ask questions on the mailing list.)

Acquisition

{{{acquisition}}}