Difference between revisions of "Rostock Max V2"

From MakeICT Wiki
Jump to navigationJump to search
Line 1: Line 1:
[[File:Rostock Max V2.jpeg|x400px|left]]
+
[[Category:FabLab Equipment]]
  
 +
{{3D-Printer-Page
 +
|printerName = Rostock Max V2
 +
|image      = Rostock Max V2.jpeg
 +
|imageCaption    = Rostock Max V2 3D Printer
 +
|buildVolume = 280 (circular) x 375 mm
 +
|filamentTypes = PLA, ABS
 +
|filamentSizes = 1.75 mm
 +
|xyResolution = 0.1mm
 +
|zResolution  = 0.0125
 +
|nozzleDiameter = 0.5mm
 +
|nozzleTemperature = 245
 +
|heatedBed = yes (SLOW)
 +
|bedTemperature = 120
 +
|manual =
 +
|website = http://www.seemecnc.com/products/rostock-max-complete-kit
 +
|websiteText = Rostock Max V2 Product Page
  
== Features ==
+
|features = The Rostock has the largest build area of MakeICT's 3D printers.
The Rostock has the largest build area of MakeICT's 3D printers.
+
|use = The Rostock Max V2 uses a tablet PC with built-in slicing software. To create a print, you just need to move your .STL file to the micro SD card which is plugged into the tablet.
 
 
== Use ==
 
The Rostock Max V2 uses a tablet PC with built-in slicing software. To create a print, you just need to move your .STL file to the micro SD card which is plugged into the tablet.
 
  
 
The easiest way to do this is via the cloud service provided by MatterControl.
 
The easiest way to do this is via the cloud service provided by MatterControl.
Line 16: Line 29:
  
 
For more information, visit the [http://wiki.mattercontrol.com/ MatterControl Wiki]
 
For more information, visit the [http://wiki.mattercontrol.com/ MatterControl Wiki]
 +
|aquisition = This printer was purchased with money.
 +
}}

Revision as of 02:14, 30 January 2016

Rostock Max V2
noframe
Rostock Max V2 3D Printer
Technical Specifications
Build Volume 280 (circular) x 375 mm
Filament Types PLA, ABS
Filament Sizes 1.75 mm
X/Y Resolution 0.1mm
Z Resolution 0.0125
Nozzle Diameter 0.5mm
Max Nozzle Temperature 245° C
Heated Bed yes (SLOW)
Max Bed Temperature 120° C
Additional Information
User Manual [[Media:|]]
Website Rostock Max V2 Product Page

Features

The Rostock has the largest build area of MakeICT's 3D printers.

Access Policy

{{{accessPolicy}}}

Use

The Rostock Max V2 uses a tablet PC with built-in slicing software. To create a print, you just need to move your .STL file to the micro SD card which is plugged into the tablet.

The easiest way to do this is via the cloud service provided by MatterControl.

  1. Go to sync.mattercontrol.com
  2. Login with info@makeict.org / makeict!
  3. Find the RostockMax v2 and click "Add File to Queue"
  4. From the tablet itself, you can now print your STL from the queue.

For more information, visit the MatterControl Wiki

Acquisition

{{{acquisition}}}