Ultimaker 2

From MakeICT Wiki
Jump to navigationJump to search
Ultimaker 2
noframe
Ultimaker 2 3D printer
Technical Specifications
Build Volume 230 x 225 x 205 mm
Filament Types PLA, ABS, CPE
Filament Sizes 2.85 mm, 1.75 mm
X/Y Resolution 0.125mm
Z Resolution 0.02mm
Nozzle Diameter 0.4mm
Max Nozzle Temperature 260° C
Heated Bed yes
Max Bed Temperature 100° C
Additional Information
User Manual Ultimaker 2 - User Manual v1.13.pdf
Website Ultimaker 2 Support

Features

Due to its ease of use and ability to produce high Quality prints, the Ultimaker 2 is the most popular 3D printer at MakeICT. A couple of modifications have been made to allow it to use 1.75mm filament with minimal re-configuration.

Access Policy

See 3D Printing for access policy.

Use

Attention! This page or section is out of date. Help us out by modifying this page.
Details: Add detailed instructions

STL files can be sliced using Cura. The resulting gcode file is saved on an SD card and prints are run through the built in interface without needing to be connected to a computer.

Acquisition

{{{acquisition}}}